RFL
has several software utilities available for download.
These are provided as a service to our customers.
Use the link for the desired utility.
IMUX 2000 Visual Network Management Software
RFL is pleased to announce the release of the new IMUX 2000 Visual Network Management Software for the IMUX 2000 product line.The new NMS software has been completely redesigned using an advanced Visual Graphical User Interface that will show the Node View as it is physically configured along with a virtual status indicator on each card.
Go to the IMUX 2000 Visual NMS web page for more information and to download the software and the quick start manual.
RFL
9508 Network Management Software V9508 10.9
This software is used to interrogate and program
the RFL 9508 DSP Powerline Carrier system. This ZIP
file contains the executable file. Windows 2000 or higher
is recommended for use with this software.
IMUX
2000 Network Management Software V11.3– November, 2007 (54.5 Mb)
The
IMUX 2000 Network Management Software is a software
program which uses the Microsoft Windows operating system.
It enables the user to perform several different tasks
related to the IMUX 2000 Multiplexer, Intelligent Line
Switch, 6 and 8 Port DACS.
The
new version supports the new CM-4 T1/E1 Common Logic
Module and is compatible with all previous versions
IMUX 2000 hardware. Also
many of the screen displays have been improved to make
the software more user friendly.The manual for reference
is also included.
Download the software today! (Default username is CONTROL and password is PASSWORD)
NMS Password Bypass for Non-English Windows OS
A
special version of NMS for use by customers who use
non-english Windows operating systems. This NMS disables
the login password.
IMUX
2000 TRAPD.CONF
This
file is a standard HP Openview Trap configuration file
for use with the IMUX 2000 SNMP Access Gateway.
IMUX
2000 MIB
This
file is a standard SNMP MIB file for use with the IMUX
2000 SNMP Access Gateway
IMUX
2000 Power Budget Spreadsheet
This
tool is used to determine the power requirements based
on channel card loading for new systems. It can also
be used to see if enough power is available to support
desired module additions.
RFL
9300 Oscillography Macro
This is an Excel macro, which allows
automatic graphing of 9300 oscillography data.
RFL
9831 Programming Utility
This
software is used to program the RFL 9831 modem settings
(i.e.: modem speed, modem type etc.)
RFL
9745 System Software (flash software for upload)
The downloadable flash software file "S9745R09.MHX" relates to Flash ICs U26 and U27 labeled "CP026", which also relates to "Version 5.2" as reported for "Software ID" PC April screen under the "F" "Configuration and Software Version Display" menu. Instructions for uploading this file can be found in the 9745 Manual section titled "How to Upload a System File From The PC To The RFL 9745", available for download from this web site.
RFL
9745 PC April Lite for Windows v2.1
PC April Lite is a Windows-based program
that resolves a problem with PC April when uploading
a BAT file from a PC to the RFL 9745 on PCs using Windows
2000, XP, or NT. PC April Lite does not contain an off-line,
emulation mode. If both off-line emulation mode and
BAT and MHX file transfers are required, please download
and use our newest browser-based software package, Web
Commander, which can also be downloaded from this page.
PC
April for the RFL 9745
This is a DOS program which allows the
user to simulate a connection with a 9745. This software
provides the user with a valuable training tool and
allows off-line configuration of the 9745 Teleprotection
Channel.
RFL
9746 Programming Facility
This software is used to program the RFL 9746.
GARD
8000 Emulator Program
This program is used to emulate the GARD 8000.
GARD 8000 Configurator
This program is used to configure the GARD 8000.
|
